速報APP / 工具 / Solar Animal Repeller

Solar Animal Repeller

價格:免費

更新日期:2017-09-28

檔案大小:1.7M

目前版本:0.0.5

版本需求:Android 4.3 以上版本

官方網站:mailto:digisineproducts@gmail.com

Email:http://www.digimaxproducts.com

Solar Animal Repeller(圖1)-速報App

This product does not include any chemical substances. The product repels animals and insects through use of physics principles. This product is equipped with infrared sensor, with wide extended detection range. When animals appear, high-tech circuits can produce preset sonic or ultrasonic to repel the identified target. When activated, the product, other than producing sounds, will also produce strong flashes to enhance the repelling effects.

This product uses solar power so batteries are not required. The built-in charging battery can store can store energy for night usage. This product can also be connected to smart phones, allowing users to monitor the current status and modify the output or frequency of the product.

Product Details

ON/OFF Power Switch: Switch to turn power on or off

Solar Panel: Provide power to charging battery

Charging Battery Slot: Slot for 6 AAA size battery to store and provide power

DC Charging Port: Port for 12VDC transformer, auxiliary solar panels, or other power supply

Infrared Sensor: High sensitivity PIR infrared sensor detects whether there are wild animals approaching, with maximum sensing distance of 15 meters. When target appears, sonic or ultrasonic and high-intensity flash(PIR Mode) is activated

Ultrasonic transmitter: produce ultra-high sound pressure sound waves or ultrasound waves. Continuous for 10 seconds

LED: High-intensity flash (PIR Mode)

Monitor: Shows various status

Frequency Switch: Adjusts frequency

Day/Night Switch: Adjusts day/night settings

Battery Check: Shows remaining power

Fixed Casing: Connector to sleeve

Fixed Sleeve: Connector to stake

Solar Animal Repeller(圖2)-速報App

Rechargeable Battery: 6 AAA battery, each capacity of 700mA / Hr

Frequency Range Details

This product has frequency range of 2000-32,000Hz, with 8 separate levels

Suggested Use

I. Press the frequency switch to adjust the desired frequency level or refer to the APP for the same function. The monitor will show the updated frequency level.

J. Press the day/night switch to adjust different modes. Press again to select a different mode, with the pattern all day-night-day, or refer to the APP for the same function. The monitor will show the updated mode with “Y” as night, “o” as day, and “F” as all day.

K. Press the battery switch to check the remaining power or refer to the APP to indicate the remaining power. The monitor will show the remaining power when requested.

Low Voltage Warning: When is the battery is low, the product will beep every 3 minutes, as an indicator.

When the product is activated with low battery, the transmitter will only operate for 5 seconds instead of 10 seconds to conserve power.

The APP can indicate the number of times PIR is activate, this data will be used for reference when changing the location of the product

The APP can indicate the time to change battery (After about 50,000 ultrasonic transmission)

The APP can turn the timer ON/OFF or serve as a remote control

The APP can change between PIR mode or automatic mode (activate every 5 minutes)

The APP can set personal password to prevent others from controlling the product using similar devices

The APP can take pictures and memorize the product’s current location for memory management

The APP can name the device for better memory management

Under PIR mode, when activated, the LED will flash to enhance repelling effects.